Latching Switch 16mm

Nice well built easy install the wiring diagram in on the pictures for the all black switch

It works as advertised.

So the seller states that this is a 5 amp switch but if you look at the specifications its only a 3 amp switch.... I used it on a 12VDC application with a relay.... The Red + and Black - are across the LED... when you put these connections across 12VDC the light comes on... The switch its self uses the WHITE wire as the 12 VDC+ feed.... the NO contact is the blue wire and the NC contact is the brown... SO if you wish the power to be applied to a circuit when the switch is engaged, you supply power to the white wire... and when the switch is latched the blue wire is powered up.... when the switch is in the off position the brown wire is powered up.... In my application I wanted the light lite ON when the switch was ON.... so I have the red wire and blue wire connected... and the black wire going to ground... I hope this helps... I had to sit down and spend 15 min with a ohm meter to sort it out... in information supplied is not enough to just wire it up until you sort out their color code

Like the appearance of the switch the stainless look is nice, the button surface itself though is a very small diameter and if you have even medium-sized fingers it's tough to latch because you must push it fairly deep before it latches if you have stubby fingers you might have to use a pencil or something to actuate it. the blue light is cool but I don't understand the alien symbol hahaha what does that mean? which way should IT go up down whatever. now the bad part about this switch. the wire harness connector, the blue plastic piece does not lock, there's no catch on the switch piece. I believe that it will fall off with any kind of vibration I'm going to try and glue it or tie wrap it so it doesn't.

The light switch works well. Smaller than what I thought it would be.

no problems, does what it should and feels solid

Awesome product.