PW-HT202P

I had the requirement to change my existing HDMI extender setup (HDelity), due to poor performance and drop outs, causing intermittent frame blanking on the remote TV set. I had previously installed a link between my extension and the main lounge using a CAT5e cable routed externally of about 40m length (I only installed this at the time because I had a partial box of CAT5e cable available). Reading on the various claims from previously installed HDMI extenders they said they would work over CAT5e cable, but at a shorter distance that using CAT6 cable. In the end I became fed up with the poor performance of the existing ones I had tried. I was tempted to install a CAT6 cable, but was put off by the arduous route that I had to run it. I therefore was scanning the products on Amazon to see if I could find a replacement extender. I looked at many, some over the £100 mark. Then I came across the PWAY unit at only £39.99, with all of the features I thought it was too good to be true. Any way I thought it was worth a try and bought the units. I installed the transmitter unit in my extension, connected to the HDMI output on my HUMAX Freesat receiver (as photographed) and the bonus of having a HDMI splitter built into the unit plugged into my Samsung TV. At the remote end in the lounge I plugged in the receiver and because the devices support POE (power over ethernet), no PSU was required. When I switched on the receiver in the lounge I immediately received a superb picture on the LG TV. I positioned the IT receiver and clicked on the HUMAX remote, worked perfectly. The PWAY units have given me a rock steady performance since install nearly 2 weeks ago. Great product - really pleased with my purchase.

Worked out of the box after others failed. So simple to setup. Sky Box - HDMI - transmitter box which is plugged in - Cat6 Ethernet cable out other side of transmitter into wall. At the other end which is about 10 metres away above my fireplace where the TV is mounted. Cat6 Ethernet cable out of wall into receiver which needs no power - HDMI out of other side of receiver into TV. Worked first time. So its device to HDMI into transmitter. Ethernet from transmitter into wall socket (cat6 ethernet cables in the wall) Ethernet from wall to receiver. HDMI from receiver into TV. 2 HDMI cables and 2 Cat6 ethernet needed. The only thing to note is that this is 1080p only. The ethernet cables will not allow any better and it will not let me set up UHD on my TV, it tells me to plug the HDMI directly from Sky to my TV to do this. Which obviously I would if I could but then I wouldn't need this product.... Recommended

Didn't work over 35m distance. Works on a short run but otherwise useless. Tested all runs and cables are fine so it is the product.

Installed easily and worked first time. The power over Ethernet feature is brilliant, meaning you only need power at the sender end, not the receiver end. Rock solid picture that never once dropped out. However, after a day or so the remote IR sender stopped working. I reconnected everything and it worked again, but stopped after another day or so. It turns out that the 3.5" jack on the HDMI sender box for this wasn't getting a good connection and kept popping out ever so slightly. Try as I might, it wouldn't keep a good connection for very long. In the end I solved it by cutting a bit of the metal casing away to give better access. However, even with this necessity, this is a brilliant product for the price. Fully recommended.

Only needed 1 of them but worked immediately & still going strong

I bought one of these, as I wanted to connect my computer on my desk, to my TV across the room, and none of the wireless options were good enough. This was easy to connect, and with a 10 meter ethernet cable, I can now watch netflix or whatever with no latency. Picture quality is good. My only issue is that when my fridge clicks on, or I turn my kitchen light on or off, the picture on my TV cuts out for a second. I suspect this is an issue with my HDMI cable, or the ethernet cable though, and probably not the extender. I don't know, and it's not a huge issue, so I can't be bothered, to tinker around and find out.

Very easy to install and on a 15m unshielded direct CAT6 cable the picture quality is 100%. However I have solid Copper CAT6, 23AWG and it doesn't work over a length of approx 25-30 metres which includes faceplates/keystones at either end with CAT6 patch cables(same cable as my main CAT6 LAN), the picture appears then flickers, disappears etc. I have tested the cables and throughput, latency etc is spot on with no errors. Also changed on the RX switch to 50m, still the same. Maybe it just doesn't like the extra breaks in the connection and needs a direct CAT6 cable to work? All in all though it does what i purchased it for so for that it gets 5 stars

Bought this to help with some livestreaming of an HDMI camera. Very simple to set up. Before we did livestreaming I performed a multitude of tests to make sure it was going to work. First off the advert says Cat 5e, but when you receive the product, it recommends CAT6. I tried it with Cat 5e cabling and got no further than about 10m before the picture quality became poor. Ordered in some Cat6 Unshilded UTP. Tried 3 different lengths, 22m, 28m, and 50m. It worked well with 22m, pretty much perfect audio and video. With 28m it was occasionally fine, but not robust, with sync problems and noisey pixel color distortions. That's despite trying the 0-30m-50m switch in both positions. The 50m cable would not work consistently at all, with either setting. My suspicion is that with Shielded CAT6 it would work, but I didn't have any of that stuff to test it with, and fortunately 22m just about got us the distance we needed. A good little product, pity the advert exagerates and set my expectations to high.

extend hdmi signal about 25 meters

Het werkt op mijn Blackmagic Atem Mini Pro met 20m Cat6 Kabel met de schakelaar op 30mtr. Perfect. Voor alles tesamen incl. Kabel voor maar 40€

Bought this for a 45-foot run and didn't want to spend money on a fibre HDMI. These work every time, without fail or complicated setup. They work so well we bought a 2nd set for a 95-foot run.

Used this to relay my security camera feed to a screen in another room. Works as intended (1080p) and easy to set up as long as the Cat cable has already been wired up behind the walls. Plug in the Cat cable (both units), the HDMI cables (both units) and the single power adapter on the transmitter end (none required on the receiver end) and ready to go. A nice feature is the HDMI out on the transmitter end so can plug in a monitor to see what's being sent to the transmitter unit (handy for troubleshooting). Another handy feature for troubleshooting is the light indicator to indicate if the unit is receiving a signal from the source. Couldn't test the IR as I didn't have anything to test with.

Das Produkt übertrifft alle Erwartungen! Optimale Übertragung von 1080p Videos über mehr als 50m mit einem vergleichsweise schlanken Netzwerkkabel (im Gegensatz zur Lösung mit Splittern und deren bei mehr als 10m unflexiblen unt teuren Kabeln), ohne Artefakte oder Störungen (Bildversatz, Randstreifen oder sonstige Nebeneffekte). Einfach Top !!!